General:

The specific construction and a high-quality manufacturing procedure result in an extremely high surface load and a high stability even in the most demanding conditions.

As the devices accommodate high performance on minimum footprint, they allow for temperatures at the tube casing up to 700°C.

 

 

Applications:

• Plastics industry
• Foundry technology
• Apparatus engineering
• Laboratory and medical technology

 

 

Construction:

The heat conductor material made from the heat-resistant alloy NiCr 8020, is wound around the ceramic body with a certain space.

The spaces are filled and sealed with high-quality magnesium oxide (MgO).

The cartridge bottom is welded to the casing tube.

 

 

Specification:

Surface load:	40W/cm² max.
	(For tool heaters, high quality of the bores must be ensured.) Fit ISA H7 with low surface roughness required, press fit preferable)
Voltage:	up to 400V possible
Diameter:
metric:	6.5mm min. 25mm max.
Imperial:	¼“ min, 1 ¼“ max.
Power:	values depend on the cartridge dimensions.
Adjustable operating temperature:	approx. 700°C

Tolerances:

Diameter:	-0.02mm bis -0.08mm
Length:	+/- 1.5%, or min. +/- 2mm
Power:	+5 / -10%

All AHLPs can be provided with thermocouple.

The compensating circuit will be manufactured to customer requirements.

Unless agreed otherwise, the thermocouple will be electrically isolated from the cartidge casing.

 

Connectiong versions:

• Reduced glass-fiber isolated nickel strand, temperature resistant
  up to 400°C max.
• High-temperature nickel strand up to 700°C max.
• Teflon nickel strand up to 180°C max.
• Silicone strand up to 180°C max.

Feed line length 1000mm

 

Additional protection:

• Glass-fiber tube
• Corrugated metal tube
• Metal braided sleeving

 

Mounting versions:

• Screw-in fitting
• Flange plates